# DIY Wooden Pallet Pry Bar

> Build a DIY pallet pry bar from square steel tubing to save more wood when dismantling pallets. Get the tool list, cut lengths and angles, and welding steps.

Page URL: https://palletfurnitureonline.com/diy-wooden-pallet-pry-bar/

Dismantling wooden pallets can require a lot of effort especially if your project requires a lot of wood. To speed up the dismantling process and save more of the pallet wood, you can build a simple wooden pallet prybar. This is a little more advanced of a project and requires a bit of welding. Follow along as we show you how simple and easy this project is…

## Some of the materials and tools you will need are:

- A wire brush to clean the areas of the tubing before welding together
- A hacksaw or angle grinder with cut off wheel to cut the steel tubing.
- 1″ OD square steel tubing, 3/16″ wall thickness, approximately 6′ long
- You’ll also need a welding machine and a measuring tape.

## DIY Pallet Pry Bar Step 1

Take the metal tubing and lay it down on the ground. With a pencil, plan, measure and cut your tubing so that you end up with:

- 2 pieces that are 5 1/4″ overall length, with one end cut at 90° and the other cut at 45°
- 1 piece that is 5 1/4″ overall length, with 90° straight ends
- 1 piece, 4′ 8″, one end straight cut and another cut at 15°

Once you have all of the above pieces cut, you need to clean them all up for welding. Take the wire brush and clean all pieces as best you can.

## DIY Pallet Pry Bar Step 2

Weld the cut pieces together to assemble the pry bar.

## DIY Pallet Pry Bar Step 3

I picked up a can of Tremclad black spray paint at Home Depot.
