# Pallet Project Tutorials

> Build a pallet Christmas tree, king-size headboard, or rustic wine rack, and find tips for dismantling pallets and welding your own pallet pry bar.

Page URL: https://palletfurnitureonline.com/pallet-project-tutorials/

## Pallet Christmas Tree Project

The DIY pallet Christmas tree project was posted on November 18, 2015.

To get this party started, first we will need to gather a few tools. For this project you will need 1 wood pallet, a skill saw, prybar, a hammer, some nails or a cordless drill and some wood screws. Depending on how you want to finish this project off, you could also use a short strand of lights, glue gun, paint brush and some green paint. a long straight edge with a pencil or a caulk line would work great too. With all of these items collected, you are now ready to start

## How To Dismantle Wood Pallets

The tutorial on dismantling wood pallets was posted on November 16, 2015.

## DIY Wooden Pallet Pry Bar

Dismantling wooden pallets can require a lot of effort especially if your project requires a lot of wood. To speed up the dismantling process and save more of the pallet wood, you can build a simple wooden pallet prybar. This is a little more advanced of a project and requires a bit of welding. Follow along as we show you how simple and easy this project is…

The DIY wooden pallet pry bar tutorial was posted on May 24, 2015.

## Some of the materials and tools you will need are:

- A wire brush to clean the areas of the tubing before welding together
- A hacksaw or angle grinder with cut off wheel to cut the steel tubing.
- 1″ OD square steel tubing, 3/16″ wall thickness, approximately 6′ long

## Building a Pallet Headboard

Building a wood pallet headboard for our king sized bed was an easy choice. That said, I figured it was best to figure it out rather than fork out the cash to buy one. There are so few headboards to choose from and I actually didn’t like many that I saw in the stores. At work we have a huge pile of pallets and when the thought came to use them I said why not?

## What you will need for this project:

- -A circular saw or chop saw.
- -A tape measure and pencil
- -wood 2” x 4” (I used (4) 8’ long pieces)
- -Wood pallets (I used 6 because I chose the exact boards I wanted)
- -Wood screws and 90 degree angle brackets (found at a hardware store)

## DIY Pallet Wine Rack

Looking for a plan to put together your vary own pallet wine rack? Well look no further! Follow along our easy step by step instructions and add a classy, rustic looking piece of functional artwork to your home.

The DIY pallet wine rack tutorial was posted on May 21, 2015.

## What You Will Need to Build a Pallet Wine Rack

- -Circular saw or reciprocating saw to make your cuts
- -Hand drill and or a drill press
- -Palm sander and sandpaper
- -A small square and pencil
- -Wood screws or nails
- -Wood Pallet (makes 2 wine racks)
