Pallet Project Tutorials
Pallet Christmas Tree Project
The DIY pallet Christmas tree project was posted on November 18, 2015.
To get this party started, first we will need to gather a few tools. For this project you will need 1 wood pallet, a skill saw, prybar, a hammer, some nails or a cordless drill and some wood screws. Depending on how you want to finish this project off, you could also use a short strand of lights, glue gun, paint brush and some green paint. a long straight edge with a pencil or a caulk line would work great too. With all of these items collected, you are now ready to start
How To Dismantle Wood Pallets
The tutorial on dismantling wood pallets was posted on November 16, 2015.
DIY Wooden Pallet Pry Bar
Dismantling wooden pallets can require a lot of effort especially if your project requires a lot of wood. To speed up the dismantling process and save more of the pallet wood, you can build a simple wooden pallet prybar. This is a little more advanced of a project and requires a bit of welding. Follow along as we show you how simple and easy this project is…
The DIY wooden pallet pry bar tutorial was posted on May 24, 2015.
Some of the materials and tools you will need are:
- A wire brush to clean the areas of the tubing before welding together
- A hacksaw or angle grinder with cut off wheel to cut the steel tubing.
- 1″ OD square steel tubing, 3/16″ wall thickness, approximately 6′ long
Building a Pallet Headboard
Building a wood pallet headboard for our king sized bed was an easy choice. That said, I figured it was best to figure it out rather than fork out the cash to buy one. There are so few headboards to choose from and I actually didn’t like many that I saw in the stores. At work we have a huge pile of pallets and when the thought came to use them I said why not?
What you will need for this project:
- -A circular saw or chop saw.
- -A tape measure and pencil
- -wood 2” x 4” (I used (4) 8’ long pieces)
- -Wood pallets (I used 6 because I chose the exact boards I wanted)
- -Wood screws and 90 degree angle brackets (found at a hardware store)
DIY Pallet Wine Rack
Looking for a plan to put together your vary own pallet wine rack? Well look no further! Follow along our easy step by step instructions and add a classy, rustic looking piece of functional artwork to your home.
The DIY pallet wine rack tutorial was posted on May 21, 2015.
What You Will Need to Build a Pallet Wine Rack
- -Circular saw or reciprocating saw to make your cuts
- -Hand drill and or a drill press
- -Palm sander and sandpaper
- -A small square and pencil
- -Wood screws or nails
- -Wood Pallet (makes 2 wine racks)
